How to Grout Tiles the DIY Way


When it comes to home improvement or minor renovation, you can always try DIY means to save money and other resources. If you are planning to get your bathroom tiles a fresh look by applying a brand-new layer of grout, here are some DIY tips for you.

Find the Right Type for Your Tiles

  1. Cement Type. Though this grout is weaker compared to epoxy, cement grouts are way easier to apply.
  2. Epoxy. If you need to grout tiles for the bathroom or sink, then you must use the epoxy grout. Epoxy-based grout is capable of withstanding a constant stream of water or wet surface.
  3. Latex. This is almost the same as with the cement grout, but it is water-resistant. Latex grout is recommended for bathrooms or countertops.
  4. Caulking. This type of grout is applied using a caulking gun, which makes it possible for you to reach even the most isolated corner of your home.

How to Grout: A DIY Tutorial

Just follow the following steps to grout tiles properly.

  1. If you are using a powder-based grout, you need to mix it well with water. Just fill a bucket with water, constantly stir, and add the grout.
  2. Diagonally put the grout on the surface, at least reaching 45 degrees angle. To ensure that no grout will be wasted, start filling the gaps on smaller corners of your home.
  3. After 10 minutes, you need to wipe the tiles (where the gap is filled) to ensure that the grout was evenly applied on the surface.
  4. Lastly, allow the grout to dry naturally and polish your work with a lint-free cloth.

Indeed, some things can be done effectively via DIY means. If the job only includes simple grout, there is no need to call for a professional backup as you can do it yourself with ease.